- Dehydrating breathers
Large oil cup
HAMPs dehydrating breathers are primarily used for oil-insulated transformers where they prevent moisture in air from coming in contact with the transformer oil and thus lowering insulation properties.
HAMPs dehydrating breathers are primarily used for oil-insulated transformers where they prevent moisture in air from coming in contact with the transformer oil and thus lowering insulation properties.
ART.NO | TYPE | Max oil weight (kg) | Comp. Weight (kg) | Silica gel weight (kg) | Total height (mm) |
|---|---|---|---|---|---|
3040 1050-SO | 4130-2 SO | 8000 | 2,9 | 2,00 | 428 |
3040 1060-SO | 4130-4 SO | 16000 | 3,7 | 4,00 | 624 |
3040 1070-SO | 4140 SO | 32000 | 5,9 | 8,00 | 1025 |
Area of use
Dehydrating breathers produced with an extra-large oil trap, manufactured for use in applications where the transformer risks being put through quick and intense fluctuations in terms of strain. Example of such applications are: wind farms and furnaces.
The following devices are manufactured with an extra-large oil trap and extended tube, this prevents the air from soaking up the oil in the silica dehumidifying agent and also ensures that the oil stays in the oil trap.
Step by step
1. Screw the dehydrating breather onto the pipe under- neath the expansion tank. The cover has a location flange. With types 4130-4 and 4140 the base also has a location flange.
2. Loosen the three upper wing nuts a few turns and then lower the front retainer bolt. Remove the plexiglass container and fill it with silica gel.
3. Check that both gaskets are correctly located, and fit the container. Tighten the wing nuts firmly, to ensure good sealing.
4. Remove the oil trap bowl by loosening the wing nut on the underneath and turning the retainer forwards 90 degrees. Fill with transformer oil up to the level mark on the oil trap.
5. Make sure the oil does not moisten the silica gel as this will destroy the gel.
See our other products
Silica gel
Trockenperlen orange silica gel is an environmentally friendly dehumidifying agent free of heavy metals.
Contact information
Address
Visiting address
Mailing address
What is it about? Fill out the form below.
Need an answer immediately? Contact us by phone: 08-760 29 25